Parquet Renovator / metalliz

Use

The Parquet Renovator metalliz suitable for all floors Vitreous* and plastic floors subject to heavy traffic.

Properties: Odorless - no trace.

The Parquet Renovator metalliz mouth pores with the finesse of its components, prevents the attachment of fouling by forming a film of high resistance to black streaks and repeated passages

The Parquet Renovator metalliz not yellow or flake.

The Renovator foil is Antislip Flooring and specific adhesion is essential for the metallization of Parquet Renovator. (protection of floors subject to heavy use)

No slipping, non-yellowing and is compatible with all flooring sealer

Its wording is consistent with the European Standard EN71.3 ''Safety of toys''

Preparation

Before using the Parquet Renovator metalliz, the floor must be clean.
It is important to always work with clean equipment, well drained and not dripping.

The Parquet Renovator metalliz apply on a dry surface and not greasy.

Application

* On pre-varnished floors, make a preliminary test on an inconspicuous area before treating entire surface.

Apply Parquet Renovator metalliz pure 1 or 2 layers with a mop or sponge mop wrung out well.

Let dry, then apply a second coat.
A deadline of 45 minutes between each layer

Commissioning of premises: 1 hour

Cleaning utensils: WATER

Use only in ventilated areas.
Not flammable

Specifications

Resin Type: Acrylic metal complex.

     Yield *: 1L = 40m ² per layer
     * Drying: 30 to 45 minutes

     * Retention: 1 year in unopened container. Store protected from freezing
     * Resealed after use.

     * AFNOR Classification: Family I, Class 7b
     * Density: 1.027 (at 20 ° C, according to NFT 30020)
     * Fluidity; 30 seconds (CA2, 5 0 20 ° C)
     * PH = 8.5
     * Scratch resistance: 6H pencil
     * Resistance to household products: Parquet Renovator metalliz is susceptible to alkaline cleaners.

Regulatory information:
Refer to Data Sheet (FDS) (available for on www.briancon-production.com).