Under Layer Universal Wood

Use

Underlayment is recommended Universal Wood flooring on softwood and hardwood.
Use only indoor.

Properties: dry 30 minutes - Odorless

The Universal Wood flooring by its quick-drying facilitates ginning very quickly after application and can thus save time.

The Universal Wood flooring by its high hardness and excellent polishability allows recovery of most finishes.

By its terms, the Universal Wood flooring is little pores of the wood.

The Universal Wood flooring maximizes the bonding of sealer on exotic wood floors and the former having been waxed, wax or oiled.

May be covered by the Products Finishing Briançon and most other finishes polyurethane or aqueous phase.
If you want to capture (Aqua Briançon Wood Treatment) or tones (shades Carbamex) timber, it should be done before applying the Universal Wood flooring.

Preparation

Bare wood and smoothed by sanding (stripping and dewaxing recommended) Dusting meticulous.
Remove all cleaners, waxes or other products suppliers.

Application: No mix-Ready to use

Shake Universal Wood flooring before use
Do not dilute

Do not use at temperatures below 12 ° C and humidity below 10%
Consult the current DTU.

Apply 1 even coat with a roller or brush the Universal Wood flooring.

For a perfect finish, make a slight ginning after drying of the Universal Wood flooring with a fine abrasive to remove the small roughness of wood.
Aspirate carefully dust.
Apply sealer or finish of choice.

Cleaning utensils: Acetone
Immediately after use.
Blot apparatus thoroughly after application. While the wipe.
Do not discharge into drains

Appearance: Colorless

Specifications

Type Resins: Synthetic selected.

• Drying out of dust: about 5 minutes
• Dry ''gin / recoverable'': about 30 minutes
• Cover: 1h30 at 20 ° C temperature
ambient.
• Yield: 1l = 10 m²
5l = 50m ²
• Retention: 1 year in unopened container.
• resealed after use.

• AFNOR Classification: Family I, class 5b / 7
• Density: 0.89 (at 20 ° C, according to NFT 30020)
• Flow: 25 seconds (CA 4 at 20 ° C)

• VOC limit value European Concentration Volatile Organic Compounds for this product (cat. / h): 750g / l (2007) / 750g / l (2010). This product contains max.735g / l C.O.V.

Regulatory information:
Refer to Data Sheet Safety (FDS) corresponding (available on www.briancon-production.com).