Outdoor ROC vinyl glue wood D3

Use

The Outdoor ROC glue allows the assembly of all solid wood, plywood, chipboard.
Veneer laminates in the external environment or housed inside moist.

The Outdoor ROC glue is recommended for the manufacture of doors, windows, kitchen cabinets, bathrooms, interior vessel.

Properties: Without mineral fillers.
The Outdoor ROC glue is made from thermoplastic resins strictly without adding mineral fillers.

The Outdoor ROC glue D3 was classified according to European standard EN204, EN205.
CTBA Approval No. 68.92.105 and 76.93.022

After drying the Outdoor ROC glue forms a transparent film and without aura
It does not stain the wood.

By its glue formula ROC Exterior has a high viscosity and excellent mechanical

The Outdoor ROC glue is flammable.

Preparation

Before applying the glue ROC Exterior cleaning and dusting surfaces.

Application: Strong adhesion
Apply with a brush, a spatula gear, a pasting on one side.
Perform a double bonding for assembly of porous wood or high density.
Build in 2 to 5 minutes.

Temperature above 10 ° C
Moisture content between 8 and 12%

Closed assembly time at 20 ° C: 5 min
Mechanical clamping: 10 to 20 minutes at 20 ° C
                                  3 to 4 minutes at 60 ° C
Final curing time: 24 hours
Clamping pressure: 2 to 7 kgf / cm ².

Cleaning utensils: water
Do not discharge into drains

Specifications:

Commodities: dispersion of synthetic resin.

• Consumption: 150 to 200gr / m²

• Retention: 1 year in unopened container. Store protected from freezing
• resealed after use.

• Density: 1.04
• Brookfield Viscosity at 20 ° C (standard AFNOR NFT 76-102): 10 000 cPs
• Shear Strength:
100kgF/cm ². (Thin seams <25/100mm).

• Thermal resistance: 70 ° C
• Solids (standard AFNOR NFT 76-101): 52-54%
• pH: 3.5

Developed and manufactured in France

Regulatory information:
Refer to Data Sheet Safety
(SDS) corresponding (available on www.briancon-production.com).