QUICK ROC Glue Vinyl on Wood D2

Use

The adhesive allows Quick ROC assembly Now all the woods' massive, plywood, chipboard.
Veneer laminates indoors.

Properties: Without mineral fillers.
Glue Quick ROC is made from thermoplastic resins strictly without adding mineral fillers.

The glue has a Quick ROC classification D2 following the European standard EN204, EN205.
Approval CTBA No F-R 68/98.122.

After drying the glue Quick ROC form a transparent film without aura.
It does not stain the wood.

By Form Quick ROC glue has a high viscosity and excellent mechanical strength.

The adhesive is flammable Quick ROC.

Preparation

Before applying the glue Quick ROC clean and dust surfaces.

Application: Strong adhesion

Apply with a brush, a spatula gear, a pasting on one side.
Perform a double bonding for assembly of porous wood or high density.
Assemble in 5 minutes.

Temperature above 10 ° C.
Humidity of wood between 8 and 12%.

Closed assembly time at 20 ° C: 15 min.
Tightening: 10 to 15 minutes at 20 ° C
5 minutes at 60 ° C.
Final curing time: 12 hours.
Clamping pressure: 2 to 7 kgf / cm ².

Cleaning utensils: water
Do not discharge into drains.

Specifications:

Commodities: dispersion of synthetic resin.

* Consumption: 150 gr / m².

* Retention: 1 year in unopened container. Store protected from freezing.
* Resealed after use.

* Density: 1.1.
* Brookfield viscosity at 20 ° C (standard AFNOR NFT 76-102): 10 000 cPs.
* Shear Strength: 100kgF/cm ² (thin seams <25/100mm).
* Thermal Resistance: 70 ° C.
* Solids (Afnor NFT76-101): 46%.
* PH: 4 to 5.

Developed and manufactured in France.

Regulatory information:
Refer to Data Sheet (MSDS) (available for on-production.com www.briancon).