Sealants for Industry
Sanding Equipment

Back to Home


Paste Wax CARBAMEX

Deeper brilliant - Grande Dureté - Resistant à l'Humidité rechercher

Use

Restoration and maintenance of furniture, woodwork and flooring.
CARBAMEX Paste Wax is suitable for finishing wood varnish or hard back.

CARBAMEX Paste Wax
can also be used on rough wood.

Properties: Brilliant deep.
By its very special formula based vegetable wax Carnauba (extracted from the tree of Brazil Copernicia or Carife) CARBAMEX Paste Wax has a deep gloss, high hardness, which makes a dry touch.

The brilliant and touch the CARBAMEX Paste Wax is sustainable over time which can heat the gasoline timber.

By finishing the hard CARBAMEX Paste Wax n'encrasse not wood, does not sticky surfaces.

A thin layer of wax will bring a touch of warmth to the finish that will make a beautiful patina over time.

CARBAMEX Paste Wax is slightly tinted. His power allows tinting to enhance the beauty of wood.

CARBAMEX Paste Wax has good resistance to moisture.

Preparation

Can be applied to the Sub Layer Universal Briancon, wood varnish polished, plated or bonded.

Application

Apply the CARBAMEX Paste Wax in thin coats to stamp steel wool very fine (000) surfaces to maintain or revitalize.

NB: the use of steel wool (000 grain) recites the surface of hard bottom and supports the grip of the CARBAMEX Paste Wax

Let dry, then shine the hard brush (tampico type, goose).
Make several applications if the wood is very dry.
The quality of the finish will also depend on sanding wood.
A pre-sanding (220 grit) will give a perfect finish.

Cleaning utensils: Odorless Thinner Briançon
Do not discharge into drains.

Specifications

Ingredients: carnauba wax (extracted from the tree of Brazil Copernicia or Carife)

     * Yield: 2 kg per 50 m² per coat
     * Drying between 2 layers: 1 hours
     * Complete drying: 24 hours

     * Retention: 3 years in unopened container.
     * Resealed after use.

     * Brookfield Viscosity (AFNOR NFT 76-102): 4800 cPs at 35 C
     * Density: 0.9 g / cm ³
     * Solids (AFNOR NFT 76-101): 35%

Color: Neutral, Pine, Natural Light, Blonde Antic, Antic Dark, Cherry, Mahogany, Ebony.

Regulatory information:
Refer to Data Sheet (FDS) (available for on www.briancon-production.com).



Go to Safety Data Sheet:



Sheet released by the Technical Service 06.09,08 and Commercial Department. Designed, developed and manufactured in France.The information provided in this data sheet are given in good faith for guidance. They do not in any case induce a guarantee from us, or take our responsibility when using our products. This technical data sheet supersedes all previous versions.


SAS with capital of 200 000 euros
Bp 90388 – Zi Thibaud – 33103 TOULOUSE cedex (France)
Phone : 05 34 60 21 00 – Fax : 05 61 41 08 25
E-mail : info@briancon-production.com
Website : www.briancon-procdution.com
RC 84B600 – Siret 330 201 138 00022 – n° TVA : FR44 330 201 138


Back