Sealants for Industry
Sanding Equipment

Back to Home


Wood Mastic Edge Filler

Finish Easy - Without Solvent

Use
The Wood Mastic Edge Filler  allows easy finishing of edge comglomerate.

Properties: Without Solvent.


The Wood Mastic Edge Filler a creamy product made from natural products and biodegradable.

The Wood Putty Song of Agglomerate ages without darkening the wood or delaminate from its support.

The Wood Putty Song of Agglomerate easily applied with a spatula without rolling.

Very fine and very dense, Wood Putty Song of Agglomerate can be painted, stained and is varnished.
You can customize your songs to your liking.

The Wood Putty Song of Agglomerate does not takes off under the action of heat.

Preparation

Wood Putty Song of Agglomerate dry and clean, free of traces of wax or dirt (sanded and stripped if necessary).
A dusting meticulous screening is recommended.

Application: Strong adhesion - High hardness.

Mix the product before use with a spatula.
Apply at above 18 ° C.

Fast Finish: 1 application.
Super finish: 2 applications followed by fine sanding (220 grit).

The Wood Putty Song of Agglomerate can be tinted Agglomerate incorporating universal colorants (paste) directly into the pot Singing Agglomerated White before the application
You can get and all the colors of your decor.

Cleaning utensils: WATER

2 Colors:
White: The melamine panels.
Beige: For raw panels.

Specifications

Commodities: animal glues

     * Sanding: after 30 minutes.

     * Retention: 3 years in unopened container.
     * Resealed after use.

     * Density 20 ° C: 2.15g/cm ².
     * PH: 6.5.
     * Solids (AFNOR NFT 76-101): 83%.
     * Shore Hardness: 50.

Not flammable.
Developed and manufactured in France.

Regulatory information:
Refer to Data Sheet (FDS) (available for on www.briancon-production.com).



Go to Safety Data Sheet:



Sheet released by the Technical Service 06.09,08 and Commercial Department. Designed, developed and manufactured in France.The information provided in this data sheet are given in good faith for guidance. They do not in any case induce a guarantee from us, or take our responsibility when using our products. This technical data sheet supersedes all previous versions.


SAS with capital of 200 000 euros
Bp 90388 – Zi Thibaud – 33103 TOULOUSE cedex (France)
Phone : 05 34 60 21 00 – Fax : 05 61 41 08 25
E-mail : info@briancon-production.com
Website : www.briancon-procdution.com
RC 84B600 – Siret 330 201 138 00022 – n° TVA : FR44 330 201 138


Back