Wood Mastic - Mastic Finishes tube''E800''

Use

The Mastic Finishes tube can get wood finishes (2/6mm) in only 1 application without withdrawal.

Properties: Without Solvent

The Mastic Finishes tube allows a very fine finish and very hard.
It is a very flexible product, easy to apply, economical because not dry in the box.

The Mastic Finishes tube is resistant to moisture:
Tested for 5 days while immersed in water at 22 ± 1 ° C + 2 cycles of 2 hours in boiling water.

The Mastic Finishes tube is ready.
In aqueous phase, it is environmentally friendly.
It is applicable on vertical surfaces, non-flammable, non toxic.
It ages without darkening the wood.

Very smooth and very dense, the Mastic Finishes tube is in saw, nails, screws, is lime, pumice is, is tinged, to wax, varnish, vitrifies like wood.

The Mastic Finishes tube can be used indoor or outdoor shelter.

Preparation

Dry wood and clean non-greasy, free from traces of wax or dirt (sanded and stripped if necessary). A dusting meticulous screening is recommended.

Application: Strong adhesion

Choose the shade of the Mastic Finishes tube closest to the final color desired.

Boucher and smooth operation in a single thin cracks or small holes.

After drying, the Mastic Finishes tube should be lightly sanded to achieve a perfect finish.

The Mastic Finishes tube in its texture and rheology can be applied using an extrusion gun or gravity on a chain (putty siding before painting).

Cleaning utensils: A water immediately after use.

Colors: White, Clear Wood, Bois Blond, Dark Wood, Exotic Wood, Red Wood, Wenge.
Easily miscible with each other.

Specifications

Raw materials: resin aqueous phase

     * Sanding: 3 pm for repairs up to 6mm.
     * Retention: 1 year in unopened container. Store protected from freezing.
     * Resealed after use.

     * Brookfield Viscosity: 110 à120000 cps at 20 ° C in manufacturing output.
     * Shore hardness: 50.
     * Solids: 80 ± 1.
     * Density: 1.68 g / cm ³.

Not flammable.
Developed and manufactured in France.

Regulatory information:
Refer to Data Sheet (FDS) (available for on www.briancon-production.com).