Cleaner

Use

The Cleaner easily scoured several layers in one application.

Properties: High penetration long - Odorless.

The Cleaner has an ultra-penetrating formula with active ingredients synergistically with water.

The Cleaner can strip paint, varnish, stains, sealants and sealing, coating fats, glues, plasters and so ... multi-layers in one application.

The Cleaner is odorless during and after stripping.

His long acting (from 15mn to 72 pm) scours multiple layers act more you leave the stripper, stripping will be more easy (on some porous surfaces, if the flux is absorbed, apply a new layer).

The Cleaner effectively removes all film-forming products with the exception of 2-component coating with hardener and polish floors ''prefinished factory''

Preparation

The Cleaner can be used on ferrous metals without alteration and without wood blackening

Application

Shake well before use Cleaner
Do not dilute

Apply a thick layer of Cleaner and regular

IMPORTANT: The time for action is based on the nature of the film strip and its thickness (some coatings are swollen by the action of the stripper, others soften and ''melt'').

The Cleaner works while it is wet when the coating material is sufficiently softened or swollen, remove the whole with a spatula or scraper, without scratching the substrate. For irregular surfaces (moulures. ..), scrub with a bristle brush (nylon, couch) in the grain of the wood.

Cleaner with a damp sponge, rinsed frequently in clean water.
Let dry 24 hours before applying the new finish.

NB: on a fragile and delicate veneer, test first.

Cleaning utensils:
Blot apparatus thoroughly after application. While the wipe.
Do not discharge into drains.

Specifications

Types of active ingredients: No chlorinated solvents (methylene chloride, trichlorethylene ....) without methanol without acid or caustic soda.

     * Yield: 6 m² for 1l.
     * Drying: Allow to dry 24 hours before applying the new finish.
     * Response time: up to 72 hours of 15mn.

     * Retention: 1 year in unopened container.
     * Resealed after use.

     * Density: 1.06 (20 ° C, according to NFT 30020).

     * Viscosity: from 2500 to 4000 cps (Brookfield viscometer, spindle 3).


Precautions:
While the Cleaner emits no odor, use it only in well ventilated areas.
Keep out of reach of children.
It is recommended to wear goggles.
Store away from heat (be careful packaging in vehicles).
Do not apply in direct sunlight to avoid excessive evaporation. Do not leave plants and aquariums in contact with the vapors of the product.
Follow the safety instructions.

Regulatory information:
Refer to Data Sheet (FDS) (available for on www.briancon-production.com).