Teak Oil

Use

The Teak Oil permeates deep woods exotic red and brown (teak niangon, rosewood ... etc.).

Properties: Waterproof - Anti-stain.

The Teak Oil is a genuine care she nurtures and protects and beautifies, preventing graying.

Very pleasant to apply, easy to maintain, the Teak Oil applicable procedure, conforms to European Standard EN 71.3 ''Safety of Toys.

Teak Oil for highlights, its matt, natural elegance of garden furniture, verandah, trellises.

For its wealth of raw materials of natural origin for Teak Oil is specially designed for outdoor exhibitions.

Inside the Teak Oil enhances the beauty of all species.

Preparation

The Teak Oil Wood applies own (new, raw or pre-oiled), well dusted.

On old wood oiled, check the grip of the old oil. If necessary, carefully fingering to eliminate the non-adherent. In cases of degraded areas, put the bare wood for best results. The wood varnishes or stains will be stripped with paint remover Briançon. Treat when necessary with the Wood Processing Aqua Briançon.

Application

Shake the Teak Oil
She is ready for use.
Do not dilute.

The Teak Oil contains natural products, which require the application of any primary hard bottom or filler.

Expand regularly with a brush in an even layer. Polishing the Teak Oil to cotton cloth. Let dry.

Apply a 2nd coat (in case of heavy loads or high risk exposures, a 3rd layer is recommended).
Let dry thoroughly before using the furniture.

Do not use on slatted floors or outside. For these carriers use the saturator Aqua Terrace Briançon.

Interview: Teak Oil talks without stripping or sanding As soon as the greased surface loses its luster dust, then apply a new layer.

The Teak Oil applied regularly feeds the wood, protects against climatic aggressions and peeling.

Cleaning utensils: Odorless Thinner Briançon

Clean rags and tools immediately after use (risk of spontaneous ignition in keeping utensils textile soaked in oil). The wipes can also be stored in water. Do not throw tools and rags soaked in oil without having rinsed with water.
Do not discharge into drains.

Appearance: Natural Mat

Specifications

Type Resins: Oil change

Under normal conditions (temperature 20 ° C, humidity 65%).

     * Drying out dust: about 1 hour.
     * Drying between coats: 4 to 6 hours.
     * Drying ''to heart'': 72 hours
     * Yield: 15 m² per liter, approximately, by layer.
     * Retention: 1 year in unopened container. Resealed after use.
     * AFNOR Classification: Family I, class 4a.
     * Density: 0.85 (at 20 ° C, according to NFT 30020).

Fluidity: 30 seconds (CA4 at 20 ° C)

Regulatory information:
Refer to Data Sheet (FDS) (available for on www.briancon-production.com).