Sealants for Industry
Sanding Equipment

Back to Home


Saturator Aqua Terrace

Odorless - Easy Implementation - Direct application of new exotic wood

Use

The Saturator AQUA Terrace is designed for the protection of all wood species: Exotic (ipe, teak bangka, Cumaru, etc.), resins (Redcedar, larch, Douglas fir, etc.), Timber Country (acacia, oak, etc.) y including wood Thermochauffés *

Properties: Direct application of exotic wood.

The Saturator AQUA Terrace has a faint odor

The Saturator AQUA Terrace is prepared with the environmental requirements, the European Standard EN 71.3 and respectful of the rights and the environment.

Without waiting for the aging of the wood Saturator AQUA Terrace can be applied immediately after installation of the work on new exotic wood.

The Saturator AQUA Terrace non film-forming does not flake and dries quickly.

The Saturator AQUA Terrace highlights, its matte and warm, natural elegance of wood while protecting it.

Preparation

Bare wood, clean sound.
Remove all cleaners, waxes or other products suppliers.
If need sanding or stripping (stripper Briançon), dust off and apply preventive treatment Bois Aqua Briançon.
The old woodwork, stained grisaillées will be dealt with Dégriseur Wood Aqua Briançon.
Treating wood attacked by fungi with the Wood Processing Aqua Briançon.
Dusting meticulous.

Application

Shake the Saturator AQUA Terrace before use and during use
Do not dilute
Apply 1st layer in the grain of the wood, spalter (brush off) or roll in providing special attention to grooves, joints and extremities (wood tip) admit 20 to 30 minutes.
As soon as the wood loses its wet, apply the 2nd layer. Smooth with a spalter dry after a few minutes to get a very good appearance without streaks or highlighted.

IMPORTANT:
To ensure optimum impregnation of wood with the Saturator AQUA Terrace ensure that the wood is dry (at least 3 days of warm weather before application) and there will be no risk of rain within 24 hours after 2nd layer. Do not apply in direct sunlight or in temperatures over 28 ° C.

* On wood thermo-heated, to test adhesion to a discreet place before
application on any surface.
Use only well ventilated.
Not flammable.
Keep out of reach of children.

Aftercare: Easy

Once the grade of wood saturated cleared naturally by the action of weathering and ultraviolet radiation, reapply the Saturator AQUA Terrace faded in places. If necessary (interview late).

Using previously Dégriseur for Wood Briançon. Do not apply where the color has not been clarified.

Specifications

     * Séchageentre 2 layers: 20 to 30 minutes.
     * Drying: 3 to 4 h.
     * Recirculation: 12 minimum.
     * Yield:
       Initial saturation exotic wood 10 to 12m ² / 1 layer.
       Initial saturation on softwood: 8 to 10 m² / l layer.
       Initial saturation on all species: 12 to 15 m² / l layer.

     * Retention: 1 year in unopened container. Store protected from freezing
     * Resealed after use.

     * AFNOR Classification: Family I, class 7b2.
     * Density: 1 (20 ° C, according to NFT 30020).

     * VOC: European Value Limit Concentration Volatile Organic Compounds in this product (Cat. / f): 150 g / l (2007) / 130 g / l (2010). This product contains max. 30g / l C.O.V.

Regulatory information:
Refer to Data Sheet (FDS) (available for on www.briancon-production.com).



Go to Safety Data Sheet:



Sheet released by the Technical Service 06.09,08 and Commercial Department. Designed, developed and manufactured in France.The information provided in this data sheet are given in good faith for guidance. They do not in any case induce a guarantee from us, or take our responsibility when using our products. This technical data sheet supersedes all previous versions.


SAS with capital of 200 000 euros
Bp 90388 – Zi Thibaud – 33103 TOULOUSE cedex (France)
Phone : 05 34 60 21 00 – Fax : 05 61 41 08 25
E-mail : info@briancon-production.com
Website : www.briancon-procdution.com
RC 84B600 – Siret 330 201 138 00022 – n° TVA : FR44 330 201 138


Back